EAW Dimensional Drawing, A & E Specifications, Input Panel, SPECIFICATIONS MQ1215

SPECIFICATIONS MQ1215

DIMENSIONAL DRAWING

A & E SPECIFICATIONS

	A
(12.75)	12.70
C
L
21.00
7.75	5.68
	10.50
10.34	A
17.15
30°
TOP

NOTES:

1.SYMBOL INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE)

2. SYMBOL INDICATES CENTER OF BALANCE.

3.WEIGHT APPROX: 128 LBS.

4.SHIPPING WEIGHT APPROX: 140 LBS.

The low frequency loudspeaker system shall incorporate two 15 inch LF transducers. The LF drivers shall be mounted in separate vented subenclosures tuned for optimum low fre- quency response.

System frequency response shall vary no more than ±3 dB from 50 Hz to 1300 Hz measured on axis. The loudspeaker shall produce a sound pressure level of 100 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 138 SPL on axis at 1 meter. The

DIMENSIONS APPLY
TO TOP AND BOTTOM
24.00	6.37	13.15
		INPUT
40.00	36.10	C
		L
		19.75	7.38
		10.69
GRILL PARTIALLY SHOWN			C
		VIEW A-A	L
FRONT			5.63
		DIMENSIONS APPLY	BACK
		TO BOTH SIDES
			510995 (O) 5/24/01

Manufacturing tolerances are +/- 0.13 and +/- 1°

INPUT PANEL

MQ1215

S/N

WHITINSVILLE, MA USA

-- + --	+
LF 1	LF 2

N E U T R I K

	NL 4 MPR
PIN 1--...	LF1--	PIN 2--...	LF2--
PIN 1+...	LF1+	PIN 2+...	LF2+

loudspeaker shall handle 2x 800 watts of amplifier power (AES Standard) and shall have a nominal impedance of 2x 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear resistant textured black paint. Input connectors shall be a 4-contact barrier strip and 1x Neutrik NL4 Speakon.

A total of sixteen 3/8"-16 threaded mounting/suspension points (4 each top, bottom, sides) shall be provided. The front of the loudspeaker shall be covered with a powder coated per- forated steel grille.

The low frequency loudspeaker shall be the EAW model MQ1215.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQ1215/0004850/001/2 pp	September 2002	Printed in USA