ProSweep Attachment 11

Operator's Manual

Maintenance

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.

Your ECHO attachment is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your attachment achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO dealer for repairs.

skill levels

Level 1 = Easy to do. Most required tools come with unit.

Level 2 = Moderate difficulty. Some specialized tools may be required.

maintenance intervals

Component/System

Maintenance Procedure

Skill Level

Frequency

Drive Shaft

Grease

1

Every 25 hours of use

Gear Housing

Grease

1

Yearly

Brushes

Inspect/Tighten/Replace

1

Before each use

Screws/Nuts/Bolts

Inspect/Tighten/Replace

1

Before each use

warning

Always stop engine and disconnect spark plug before performing maintenance procedures, otherwise serious injury may result.

lubrication

Level 1.

Tools Required: 13 mm Open End Wrench, 4 & 5 mm Hex Wrench,

Clean Rag

Parts Required: Gear Housing EP "0" or "00" Grease, Drive Shaft

POWER BLENDXTM

Gear Housing

1.Clean all loose debris from gear housing.

2.Remove screw plug (A) and check level of grease.

A

3. Add grease if necessary, DO NOT over fill.

4.Install screw plug (A).