8

Contents

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

___ 1 - Brushes / Gear Housing Assembly

___ 1 - Lower Drive Shaft Assembly

___ 1 - Operators Manual

___ 1 - Warranty Registration Card

___ 1 - Storage Hook Assembly

Assembly

WARNING

Do not perform maintenance or assembly procdures with engine running.

Tools Required: 4 & 5 mm Hex Wrench

Parts Required: ProSweep Gear Housing, Lower Drive Shaft Assembly,

PAS or SRM-SB Power Head w/Shaft & Coupling.

prosweep gear housing assembly to lower drive shaft assembly

1.

Remove vinyl caps from attachment drive shaft.

A

 

 

2.

Place brush gear housing assembly on a flat surface with gear

 

 

housing shaft mount at 45° angle.

 

3.

Remove gear housing locator screw (A) with 4 mm hex wrench.

 

4.

Loosen gear housing mounting bolt (B) with 5 mm hex wrench.

 

5.

Position lower drive shaft (end without serial number decal) into

B

 

gear housing shaft mount.

 

 

6.Align hole in drive shaft housing with gear housing shaft hole

(C) and seat lower drive shaft end into gear housing shaft mount. Install and tighten locator screw (A).

7.Tighten gear housing mounting bolt (B).

C