Echo 99944200553 power head shaft/lower shaft assembly, NOTE, Caution

ProSweep Attachment	9
Operator's Manual

power head shaft/lower shaft assembly

1.Turn gear housing assembly over so that gear housing mounting bolt (E) faces upward.

2.Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position.

Caution

Thrown objects hazard. Install lower drive shaft so that gear housing mounting bolt (E) faces upwards. Otherwise debris will be thrown toward user.

3.Remove cardboard spacer from coupler, if necessary.

4.Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages upper drive shaft mount.

NOTE

Short couplings fit flush to decal point (F). Long couplings are 4-3/4 in. long, and fit flush to line (C).

5.Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by twisting lower drive shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation.

6.Secure lower shaft assembly to coupler by tightening clamping knob (D).