Echo 99944200553 brush replacement

ProSweep Attachment 13

Operator's Manual

brush replacement

Level 1.

Tools Required: 8 mm Open End Wrench, Cross Head Screwdriver

Parts Required: Standard Brush Assy .018 in.

P/N 99944200551 QTY (2)

Optional Brush Assy .028 in.

P/N 25020225661 QTY (2)

Brushes that are broken off, deformed, or worn to within 25.4 mm (1 in.) of the brush holder drum should be replaced for best sweeping

efficiency.

1.Locate brush holder access hole (A) near outer drum end.

2.Hold 8 mm nut (B) from turning with open end wrench inserted through drum holder cap. Loosen and remove bolt and lock nut with cross head screwdriver through holder access hole (A).

3.Remove drum cap (C). Slide brush holder drum off square axle shaft.

4.Install new brush holder drum, aligning hole (A) in drum axle with axle shaft hole.

5.Install drum cap, aligning cap holes with axle shaft and brush holder drum holes.

6.Install bolt and locknut. Tighten securely.