Echo CS-360T Maintenance and Care, skill levels, maintenance intervals, I / R, I / C / R

Maintenance and Care

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from

all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a com- plete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.

Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your Echo dealer for repairs.

skill levels

Level 1 = Easy to do. Common tools may be required.

Level 2 = Moderate difficulty. Some specialized tools may be required.

ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.

maintenance intervals

COMPONENT/	MAINTENANCE	REQ'D	DAILY OR		EVERY	3 MONTHS	YEARLY 600
		SKILL	BEFORE			OR 90
SYSTEM	PROCEDURE				REFUEL		HOURS
		LEVEL	USE			HOURS
Air Filter	Inspect/Clean	1	I / C *			R *
Automatic Oiler	Inspect/Adjust	1	I
Oil Filter	Inspect/Replace	1	I			I/C *
Fuel System	Inspect/Replace	1	I (1) *		I (1) *
Fuel Filter	Inspect/Replace	1				I *	I / R *
Fuel Cap Gasket	Replace	1				I *	R
Guide Bar & Sprocket	Inspect/Clean/Lubricate	1	I / C *		I
Nose
Saw Chain	Inspect/Sharpen/Replace/	2	I	*
	Tensioning
Sprocket	Inspect/Replace	2	I	*
Spark Plug	Inspect/Clean	1				I / C / R *
Cooling System	Inspect/Clean	2	I / C
Muffler Spark Arrestor	Inspect/Clean/Replace	2				I / C / R *
Cylinder Exhaust Port	Inspect/Clean/Decarbon	2				I / C
Recoil Starter Rope	Inspect/Clean	1	I / C *
Screws/Nuts/Bolts	Inspect/Tighten/Replace	1	I	*

MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES:

(1) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. * Replacement is recommended based on the finding of damage or wear during inspection.

17