Echo CS-330T EPA 2010 and Later and/or C.A.R.B. TIER, Emission Control exhaust & evaporative

Emission Control (exhaust & evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (en- gine modification) and, if the second to last character of the Engine Family on the Emission Control Informa- tion label (sample below) is “C”, “K”, or “T”, the emis- sion control system is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions for California models may only be applicable to fuel tanks.

An Emission Control Label is located on the en- gine. (This is an EXAMPLE ONLY, information on label varies by engine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Description

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restric- tions, guide bar and saw chain installation and other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

contents

1 - Power Head

1 - Guide Bar

1 - Kick Guard

1 - Hex Head Bolt

1 - Hex Nut

1 - Saw Chain

1 - Instruction Manual

1 - Safety Manual

1 - Warranty Registration Card

1 - Echo Power BlendX TM 2-stroke oil sample - Assembly Tool (s)

6