CS-450

PREPARATION FOR USE

WARNING

Using improper replacement components or remov- ing safety devices may result in serious or fatal injury.

Bolt (A)

Dimple (D)

Kick Guard®

Rear hole (B)

Recess (E)

Front hole (C)

Nut (F)

Guide bar

WARNING

Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

NOTE

The machine may be delivered with guide bar, tip guard, and saw chain separated. Install guide bar, tip guard, and saw chain as follows.

KICK GUARD® TO BAR INSTRUC- TIONS

Tools Needed: Two 11 mm (7/16 in.) Wrenches.

For saws with Kick Guard® P/N 2893201 and Symmetrical Low-Kick type (Double Guard) guide bars.

1.Install bolt (A) in rear hole (B) of Kick Guard® and through front hole (C) in guide bar.

2.IMPORTANT: Dimple (D) in Kick Guard® must engage recess (E) in guide bar.

3.Tighten nut (F) and bolt (A) using 11 mm (7/16 in.) wrenches until snug. Make certain Kick Guard® is flush against guide bar.

4.Tighten nut (F) 1/8 additional turn.

5.Check to make certain Kick Guard® is tight on guide bar.

Brake lever

(Front hand guard)

Brake connector

Clutch cover

Two nuts

Two bolts 5 12 mm

Spiked bumper

GUIDE BAR AND SAW CHAIN IN- STALLATION/REMOVAL

NOTE

Move the chain brake lever (Front hand guard) fully rearward to remove or install the clutch cover to chain saw.

Align the brake connector of the clutch cover to the groove on the side of the brake lever (Front hand guard).

1.Loosen air cleaner cover knob and remove air cleaner cover.

2.Remove spark plug lead.

3.Remove two clutch cover nuts and remove clutch cover.

4.Remove bar and saw chain if necessary. See

“Maintenance and Care” section for guide bar/ saw chain maintenance procedures.

5.For initial setup, install the spiked bumper on the front of machine with two 5 12 mm bolts.

11

Page 11
Image 11
Echo 2CS-450 Preparation for USE, Kick Guard to BAR INSTRUC- Tions, Guide BAR and SAW Chain IN- STALLATION/REMOVAL

2CS-450, CS-450 specifications

The Echo CS-450 is a powerful and versatile chainsaw designed for both professional and home use. Renowned for its reliability and performance, the CS-450 is an ideal choice for tree care, land management, and firewood cutting. With its robust design, it stands out as a dependable tool for various cutting tasks.

One of the standout features of the Echo CS-450 is its engine. It is powered by a 45.0 cc, 2-stroke engine that delivers exceptional power while maintaining fuel efficiency. This engine translates to a power output of approximately 2.7 kW, allowing users to tackle demanding cutting jobs with ease. The chainsaw also incorporates a patented i-30 starting system, which reduces the effort required to start the engine. This feature significantly enhances user experience, especially during cold starts or extended use.

The CS-450 is equipped with a 20-inch guide bar, making it suitable for medium to large cutting tasks. The bar length provides a good balance between maneuverability and cutting capacity. Additionally, the chainsaw operates with a low-kickback chain, improving user safety while offering smooth and efficient cutting performance. This is especially important for both novice and experienced users, as it minimizes the risk of accidents.

In terms of design and ergonomics, the Echo CS-450 is built for comfort and ease of use. The chainsaw features an anti-vibration system that reduces operator fatigue during prolonged use. Its lightweight construction, weighing around 10.1 lbs, makes it easy to handle without sacrificing power. The front and rear hand grips are designed for enhanced comfort, allowing users to maintain good control over the saw.

The CS-450 is also equipped with a tool-less air filter cover and a side-access chain tensioner, making maintenance straightforward and efficient. The cleaner air filter helps extend engine life, while the quick chain tensioning system allows users to make adjustments effortlessly on the job.

For those who value durability, the Echo CS-450 features a heavy-duty build that includes a magnesium crankcase, resisting wear and tear under demanding conditions. The chainsaw is designed to operate in various environments, whether it be professional settings or home gardening tasks.

In summary, the Echo CS-450 combines power, efficiency, and comfort in a robust design. With its advanced features, including a high-performance engine, safety mechanisms, and user-friendly design elements, it remains a top choice for individuals seeking a reliable and effective chainsaw. Whether you are cutting firewood or maintaining trees, the CS-450 is an excellent partner to get the job done efficiently and safely.