Error messages, Properly identified

Symptom-to-FRU index

Error messages

Symptom or error	FRU or action, in sequence

Device address conflict.	1.	Load “Setup Defaults” in
		IBM BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Allocation error for device.	1.	Load “Setup Defaults” in
		IBM BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Failing bits: nnnn.	1.	DIMM.
	2.	System board.

Invalid system configuration	1.	DIMM.
data.	2.	System board.

I/O device IRQ conflict.	1.	Load “Setup Defaults” in
		IBM BIOS Setup Utility.
	2.	Backup battery.
	3.	System board.

Operating system not found.	1.	Check that the operating
		system has no failure and is
		installed correctly.
	2.	Enter IBM BIOS Setup
		Utility and see whether
		the hard-disk drive and
		the diskette drive are
		properly identified.
	3.	Reseat the hard-disk drive.
	4.	Reinstall the operating
		system.
	5.	Diskette drive.
	6.	Hard-disk drive.
	7.	System board.

Hibernation error.	1.	Restore the system
		configuration to what it
		was before the computer
		entered hibernation mode.
	2.	If memory size has been
		changed, re-create the
		hibernation file.

Fan error.	Fan.

Thermal sensing error.	System board.