Removing and replacing a FRU
1160 Hard-disk bay
For access, remove these FRUs, in order:
v“1010 Battery pack” on page 60
v“1020 Backup battery” on page 61
v“1030
v“1070 Ultrabay 2000 device” on page 73
v“1080 Keyboard” on page 74
v“1090 Keyboard CRU insulator” on page 82
v“1100 Hinge cover” on page 83
v“1110 Keyboard bezel” on page 88
v“1150 Speaker” on page 103
Note: Step and are only for the case when Asset ID RF adapter has been attached into the
4
3
1
2
Step | Screw (quantity) | Torque |
|
|
|
| M2.5 × 4.8 mm, | 0.392 Nm |
|
| (4 kgfcm) |
|
|
|