IBM T21, T22 manual Hard-disk drive, Do not drop or apply any shock to the hard-disk

Removing and replacing a FRU

1030 Hard-disk drive

Attention

Do not drop or apply any shock to the hard-disk

drive. The hard-disk drive is sensitive to physical shock. Incorrect handling can cause damage and permanent loss of data.

Before removing the drive, have the user make a backup copy of all the information on the drive if possible.

Never remove the drive while the system is operating or is in suspend mode.

For access, remove this FRU:

v“1010 Battery pack” on page 60

1

Note: The hard disk is attached to the cover.

Step	Screw (quantity)
	Coin screw (1) or security screw (1)

Note: Use a 2.5-mm Allen wrench to remove the security screw.

(continued)

ThinkPad T20, T21, T22 and T23 series 63