Removing and replacing a FRU
1170 Ultrabay 2000 slot
For access, remove these FRUs, in order:
v“1010 Battery pack” on page 60
v“1020 Backup battery” on page 61
v“1030
v“1070 Ultrabay 2000 device” on page 73
v“1080 Keyboard” on page 74
v“1090 Keyboard CRU insulator” on page 82
v“1100 Hinge cover” on page 83
v“1110 Keyboard bezel” on page 88
For T20 series
1
2 |
Step | Screw (quantity) | Torque |
|
|
|
| M2.5 × 14 mm, | 0.392 Nm |
|
| (4 kgfcm) |
|
|
|
Note: T20 series do not have the removal procedure
and | . After step | , go to step | . |
When installing: Make sure that the FPC connector is firmly attached.
(continued)