Echo MS-40BP manual Applications & USE for Your Sprayer, Sprayer Components & USE Information

APPLICATIONS & USE FOR YOUR SPRAYER

Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals have already been used in the sprayer. If a sprayer has been used for plant protection or as an herbicide, clean the sprayer completely (see cleaning section) before using.

Plant Food: Use different spray patterns for optimum foliage feeding or for fungicide and pesticide application.

Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant feeding or protection without thoroughly cleaning (see cleaning section) the sprayer first. General Household Use: Apply detergents, vinegar, cleaning solutions, warm water (do not exceed 120°F/49°C) or nontoxic household cleaning chemicals for carpets, floors, walls, glass, counter tops and ceilings. DO NOT use sprayer that has been used with herbicides, pesticides or other toxic chemicals for household applications.

General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general purpose cleaning. Other applications include wood preservatives, waxes, water proofing, and diluted household bleach (max. 1 part household bleach to 9 parts water solution).

SPRAYER COMPONENTS & USE INFORMATION

NOZZLE ASSEMBLY

Figure 1-2

Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to the elbow (5). Unscrew the retaining nut (2). Push the nozzle body (3) with the nozzle gasket

(4)out of the retaining nut (2). To reinstall the nozzle, reverse the above instructions.

Figure 3

Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining nut. To reinstall the nozzle, reverse the above instructions.

1. Poly	1. Brass
Nozzle Cap
	Nozzle Cap
	2. Retaining	2. Retaining
	Nut	Nut
	3. Nozzle	3. Nozzle
	Body
		Body
	4. Nozzle	4. Nozzle
	Gasket
		Gasket
	5. Elbow	5. Elbow
	Figure 1	Figure 2

WAND ASSEMBLY

1.Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.

2.Turn and tighten the retaining nut clock-wise onto the shut-off valve.

Retaining Nut	Wand	O-ring	Shut-off
			Valve

Retaining Nut

Fan Nozzle Tip

Nozzle

Gasket

Elbow

Figure 3

2E