SPRAYER COMPONENTS & USE INFORMATION, Continued
INSTALLING THE SHOULDER STRAP
The backpack strap is provided with multiple features including shoulder strap and waist strap (fgure 1). The top of the shoulder strap is attached to the top of the tank and is removable.
The strap attaches to the base of the sprayer by sliding the buttons into the slots until they snap into place (Figure 2).
Shoulder
Strap
Waist
Strap
Tank Base
Strap Button
Figure 1 | Figure 2 |
Strap Assembly |
|
WAND/PUMP HANDLE
The pump handle stores vertically and sets into the pump handle clip (Figure 1). The wand is stored in the wand clip (Figure 2).
Link
Arm
Pump
Handle Clip
Pump
Handle
Figure 1
Wand Clip
Wand
Pump
Handle
Figure 2
FILLING THE SPRAYER
Make sure the flter basket is in place to keep debris from entering the tank.
Determine the amount of mixture needed for your application. Add the proper amount of water to the tank. Add the proper amount of chemical to the tank (check the chemical label for proper ratio of chemical). Stir mixture in tank with a clean utensil (like a paint stirrer). The tank will hold the
It is not necessary to completely fll the sprayer tank with each use. You can fll the tank with only the amount needed for each application.
Always follow the manufacturer’s instructions included on their product label.
4E
