POWER BLOWER 11

OPERATOR'S MANUAL

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of 2-stroke oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

Fuel to Oil Mix - 50:1 Ratio

U.S.

 

METRIC

 

 

 

 

 

 

 

GAS

 

OIL

GAS

 

OIL

 

 

 

 

 

 

Gallons

 

Fl. oz.

Liter

 

cc.

 

 

 

 

 

 

1

 

2.6

4

 

80

2

 

5.2

8

 

160

5

 

13

20

 

400

 

 

 

 

 

 

IMPORTANT

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.

IMPORTANT

Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.

STARTING COLD ENGINE

•Check unit for loose nuts, bolts and screws daily.

•Recoil starter: Use short pulls - only 1/2-2/3 of rope length for starting. Do not allow the rope to snap back in. Always hold the unit firmly.

•Rotate throttle handle downward to a comfortable operating position.

1.Throttle Lever

Move throttle lever (A) to "SLOW" (START) position.

2.Choke

Move choke (B) to "Cold Start" () position.

3.Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

A

Fast

Slow

B

C