Echo PB-610 VERY, Level1, Level1, IMPORTANT, SPARK PLUG, FUEL FILTER

16

FUEL FILTER

Level1.

Tools required: 200-250 mm (8 - 10 in.) length of wire with one end bent into a hook, clean rag, funnel, and an approved fuel container.

Parts required: REPOWERTM TuneUpKitP/N90071

WARNING DANGER

Fuel is VERYflammable. Use extreme care when mixing, storing or handling.

1.Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2.Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.Remove the filter from the line and install the new filter.

SPARK PLUG

Level1.

Tools required: 3/4 in. Spark Plug deep socket, feeler gauge

Parts Required: REPOWERTM TuneUpKitP/N90071

IMPORTANT

Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise severe engine damage may occur.

1.Remove spark plug and check for fouling, or worn and rounded center electrode.

2.Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage engine.

3.Adjust spark plug gap by bending outer electrode.

4.Tighten spark plug to 150-170 kg/cm (130-150 in. lb.).

0.65mm (0.026 in.)