12

4.Recoil Starter

Pull recoil starter handle (D) and engine should start.

5.Choke

Move choke (B) to run () position and if necessary, restart engine.

NOTE

If engine does not start after 5 pulls, repeat instructions 2-5.

NOTE

Allow engine to warm up before use.

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close the choke.

1.Throttle Lever

Move throttle lever (A) to "SLOW" (START) position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

3.Recoil Starter

Pull recoil starter handle (D) and engine should start.

NOTE

If engine does not start after 5 pulls, use cold start procedures.

D

A

Fast

Slow

B

C

D