OPERATION | ||||
|
|
|
| |
Starting Warm Engine |
| |||
A | ||||
The starting procedure is the same as Cold Start except DO | ||||
NOT close the choke, and do not depress throttle trigger to wide |
| |||
open position. |
| |||
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
The attachment should not move at idle, otherwise serious personal injury may result.
Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.
1.Stop Switch
Move stop switch (A) away from the STOP position.
2.Purge Bulb
| Pump purge bulb (C) until fuel is visible and flows freely in the | B | |
| clear fuel tank return line. Pump bulb an additional 4 or 5 | ||
|
| ||
| times. |
| |
|
| C | |
|
| D | |
3. | Recoil Starter |
| |
| |||
| Lay the unit on a flat area and keep movable attachment parts |
| |
| clear of all obstacles. Firmly grip throttle handle and throttle |
| |
| trigger lockout with left hand. Rapidly pull recoil starter |
| |
| handle/rope (D) until engine fires. |
| |
Note: If engine does not start after 5 pulls, use Cold Start |
| ||
| Procedure. | D | |
|
| ||
Stopping Engine |
| ||
A | |||
1. | Throttle | ||
| Release throttle and allow engine to return to idle before |
| |
| shutting off engine. |
| |
2.Stop Switch
Move stop switch (A) to STOP position.
If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before using unit again.
18 | X7502026303 |
© 6/2014 ECHO Inc.
