MAINTENANCE | |
|
|
Blade Replacement
Level 1.
Parts Required: | Blade, new split pin |
Note: Replace blade when it is bent, damaged, or worn shorter than 6 inches.
1. Remove split pin (A).
G
2. | Align hole in inner blade adapter (B) with notch in gear | B |
| housing, and insert locking tool (G) to prevent PTO shaft (C) | |
|
| |
| from rotating. | C |
3. | Remove L.H. blade nut (D) by turning clockwise. Remove |
|
| outer blade adapter (E), and blade (F). | F |
4. Install and center blade (F) on inner blade adapter (B).
5. Install outer adapter (E) and nut (D). Tighten nut (D) firmly, | E |
turning counterclockwise. | D |
Note: Never reuse old split pin. | A |
6.Install new split pin (A) to secure nut, and bend both legs of pin counterclockwise around PTO shaft (C).
26 | X7502026303 |
© 6/2014 ECHO Inc.
