Power PrunerTM 17
Operator's Manual
starting warm engine
The starting procedure is the same as Cold Start except DO NOT close | A |
the choke, and do not depress throttle trigger to wide open position. |
WARNING
The attachment should not move at idle, otherwise serious personal injury may result.
NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.
1.Stop Switch
Move stop switch (A) forward away from the STOP position.
2. | Purge Bulb |
| C | ||
|
|
|
| ||
| Pump purge bulb (C) until fuel is visible and flows freely in the |
|
|
|
|
|
|
|
|
| |
| clear fuel tank return line. Pump bulb an additional 4 or 5 times. |
|
|
|
|
|
|
|
|
| |
3. | Recoil Starter |
|
|
|
|
| Lay the unit on a flat, clear area and pull the recoil starter handle |
|
|
|
|
| (D) until the engine fires. |
|
|
|
|
|
|
|
|
|
|
| NOTE |
|
|
|
|
|
|
|
|
| |
| If engine does not start after 5 pulls, use Cold Start Procedure. |
| D |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
stopping engine
1. Throttle | A |
Release throttle and allow engine to return to idle before shutting |
|
engine off. |
|
2.Stop Switch
Move stop switch (A) backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using pruner again.