Power PrunerTM | 7 |
Operator's Manual |
equipment
WARNING
Serious injury may result from the use of non approved guide bar and saw chain combinations. ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit. Read and comply with all safety instructions listed in this manual.
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
Guide Bar and Saw Chain
•Check that the cutting attachment, guide bar, and saw chain is firmly attached and in safe operating condition.
•Use only one
•Do not hit rocks, stones, tree stumps, and other foreign objects with the saw chain.
•Do not cut into the ground with the saw chain.
•If cutting attachment end strikes an obstruction, stop engine immediately and inspect saw chain for damage.
•Do not operate with a dull, fractured, or discolored saw chain.
•Remove all foreign objects from work area.
•Always cover the guide bar and saw chain with guide bar cover during transportation and for storage.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings.
•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
WARNINg
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an authorized servicing dealer before using.