Echo PPF-225 GUIDE BAR, SAW CHAIN, POWER HEAD, STRAP HOOK, STOP SWITCH, FRONT HANDLE, CUTTING SHOE, CUTTING ATTACHMENT, REAR HANDLE ASSEMBLY, THROTTLE TRIGGER LOCKOUT

Power PrunerTM	9
Operator's Manual

9 8

7

6

10

5 4

11 3 2 1

12

P/N X505001821

13

1.POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Starter.

2.REAR HANDLE ASSEMBLY - Rear (right hand) handle.

3.THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged.

4.STOP SWITCH - Mounted on top of rear handle assembly. Move switch forward to run, back to stop.

5.STRAP HOOK - Used to secure unit to shoulder harness.

6.FRONT HANDLE - Cushioned grip for left hand.

7.CUTTING ATTACHMENT - Sealed, gear ratio is 1.5:1 reduction.

8.AUTOMATIC OILER ASSEMBLY - Self oiling. Use high quality, low viscosity, non detergent bar and chain oil.

9.GUIDE BAR - 254 mm (10 inch) Bar.

10.SAW CHAIN - 91, 9.53mm (3/8 inch) pitch, 0.050 gauge low profile Oregon® saw chain. Runs approximately

609.6 m/min. (2000 ft/min) at full throttle.

11.CUTTING SHOE - Used to capture and stabilize branch while cutting. Place cutting shoe against branch, acceler- ate and lower saw chain into branch.