MAINTENANCE AND CARE
- ALWAYS KEEPTHE MACHINE CLEAN -
Carburetor | AIR FILTER | |
• | Check before every use. | |
| • | Remove filter cover. |
|
| - Remove wing nut. |
| • Brush off dust lightly or wash in a non- | |
|
| inflammable solvent if necessary. Dry well |
|
| before reinstalling. |
Case
Filter | Air cleaner cover |
|
CHECK FUEL SYSTEM
•Check before every use.
•After refueling make sure fuel does not leak or exude from around fuel pipe, fuel grommet or fuel tank cap.
•In case of fuel leakage or exudation there is a danger of fire. Stop using the machine immediately and request your dealer to inspect or replace.
SPARK PLUG
| • Clean or replace the plug if fouled with heavy or |
| oily deposits. Replace the plug if the center |
| electrode is worn or rounded at the end. |
| - The standard spark gap is 0.6 to 0.7 mm |
| (0.024 to 0.028 in.). |
| - Correct the spark gap if it is wider or narrower |
| than the standard gap. |
0.6 - 0.7 mm (0.024 - 0.028 in.) | • Fastening torque = 15 to 17 N• m |
| (130 to 145 in•lb.) |
- 8 -