GRASS TRIMMER/BRUSH CUTTER

11

 

OPERATOR'S MANUAL

SPECIFICATIONS

 

 

 

MODEL -----------------------------------------------------

SRM-210SB

 

 

Unit Length -------------------------------------------------

1770mm(69.7in.)

 

 

Unit Width --------------------------------------------------

251mm(9.9in.)

 

 

Unit Height -------------------------------------------------

235mm(9.25in.)

 

 

Weight (dry) w/cutting attachment ----------------------

4.82 kg (10.62 lb.)

 

 

Engine Type ------------------------------------------------

Air cooled, two-stroke, single cylinder gasoline engine

 

 

Bore ----------------------------------------------------------

32.2mm(1.27in.)

 

 

Stroke --------------------------------------------------------

26.0mm(1.02in.)

 

 

Displacement -----------------------------------------------

21.2 cc (1.29 cu. in.)

 

 

Exhaust System --------------------------------------------

Spark Arrestor Muffler

 

 

Carburetor --------------------------------------------------

Zama Rotary model w/purge

 

 

Ignition System --------------------------------------------

CDI (capacitor discharge ignition)

 

 

Spark Plug --------------------------------------------------

NGKBPM-8YGap0.65mm(0.026in.)

 

 

Fuel ----------------------------------------------------------

Mixed (Gasoline and Two-stroke Oil)

 

 

Fuel/Oil Ratio -----------------------------------------------

50:1 two-stroke air cooled engine oil

 

 

Gasoline -----------------------------------------------------

89 Octane unleaded. DO NOT use fuel containing methyl alcohol,

 

 

 

more than 10% ethyl alcohol or 15% MTBE.

 

 

Oil ------------------------------------------------------------

Power Blend TM Premium Universal 2-Stroke Oil

 

 

Fuel Tank Capacity ----------------------------------------

0.45 lit. (15.2 US fl. oz.)

 

 

Starter System ----------------------------------------------

Automatic Recoil Starter

 

 

Clutch -------------------------------------------------------

Centrifugal Type

 

 

Drive Shaft (upper & lower) ------------------------------

1/4 in. Flex Shaft

 

 

Rotating Direction -----------------------------------------

Counter clockwise viewed from top

 

 

Cutting Attachment ---------------------------------------

Nylon line head (2-line) with .095 in. Cross FireTM line capacity 6 m

 

 

 

(20 ft.)

 

 

Handles* ----------------------------------------------------

Front - Loop, Rear - Grip, when operating with standard line head

 

 

Shoulder Harness ------------------------------------------

Optional

 

 

Idle Speed (RPM) ------------------------------------------

2,400-3,200

 

 

Wide Open Throttle Speed (**RPM) --------------------

8,000 - 9,000

 

 

* Install and use U-Handle when operating any model with steel blade.

**The RPM range shown applies for all attachments. Refer to your attachment Operator's Manual "Specifications" section for proper RPM specifications.