Echo SRM-210SB PLASTIC SHIELD INSTALLATION, NYLON LINE HEAD INSTALLATION, FRONT HANDLE INSTALLATION, (Use with Plastic Shield), (For Nylon Line Operation)

14

PLASTIC SHIELD INSTALLATION

(For Nylon Line Operation)

Tools Required: Screwdriver

Parts Required: Plastic Shield, Shield Plate, three (3) 5mm x 16mm screws

NOTE

The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades.

1. Remove vinyl protector from PTO shaft.

A

2. Place plastic shield on bottom of bearing housing flange.

3. Place shield plate on plastic shield, align holes. Install three (3) screws from bottom through plate and shield into gear case.

4. Install adapter plate (A) onto PTO shaft.

NYLON LINE HEAD INSTALLATION

(Use with Plastic Shield)

Tools Required:	Head Locking Tool
Parts Required:	Nylon Line Head	B

1.Be sure upper adaptor plate remains on PTO shaft.

2.Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (B).

3.Thread line head onto shaft by turning it counter clockwise until head is tight against upper plate.

4.Remove head locking tool.

FRONT HANDLE INSTALLATION

Tools Required: Screwdriver

Parts Required: Front Handle Assembly

1. Position front handle for comfortable operation and secure screws.