Grass Trimmer/Brush Cutter 25 Operator's Manual
1.Remove air cleaner cover.
2.Remove spark plug lead.
3.Remove (2) muffler cover screws and muffler cover (A).
4.Remove 2 engine cover screws and engine cover (B).
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder fins.
5.Use brush to remove dirt from the cylinder fins.
6.Remove grass and leaves from the grid between the recoil starter and fuel tank.
7.Assemble components in reverse order.
A
B 
exhaust system
Spark Arrestor Screen
Level 2.
Parts Required: Spark Arrestor Screen, Gasket
1.Remove two (2) muffler cover screws and muffler cover (A).
2.Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering cylinder.
A
