PULL
Quick release latch
SHOULDER HARNESS
∙Install the harness over the both shoulders and adjust shoulder straps so that the quick release latch rests low on the right hand side.
∙Attach the trimmer/brushcutter to the harness by means of the quick release latch.
∙Make some practice sweeps as with a scythe and readjust the harness as necessary for comfort and to maintain the cutter parallel to the ground.
WARNING 
DANGER
IN CASE OF EMERGENCY, PULL THE QUICK RELEASE LATCHTO DISCONNECT THE TRIMMER FROM THE HARNESS.
SHIELD
When using a metal blade. Use same as Nylon line.
- 13 -