Nut (B) | Nut (A) |
| Swivel |
Stop lead
Ground lead
4 | 6 | 2 | 1 |
| |||
|
| 7 |
|
3
5
Shoulder strap assembly
Quick release latch
Waist pad
THROTTLE CABLE
The engine is delivered with throttle cable (engine side) separated, assemble the cable to carburetor as follows.
∙Remove the cover.
∙Remove nut (A) and one washer from throttle cable.
∙Insert throttle cable througn the hole of bracket as shown.
∙Replace washer and nut (A) finger tignt, and attach the inner cable to swivel on throttle lever ensuring that the nipple fits into socket provided on one side of slot.
∙Tighten nut (A) to secure in this position.
∙Check that throttle operates freely and returns to idle position.
∙Do not loosen nut (B) unnecessarily, since it has been located properly at the factory.
∙Reinstall air filter and cover.
∙Connect stop lead and ground lead by couplers .
SHIELD
Fit the shield on the gear housing and tighten screws with washers (Seven points) as shown.
SHOULDER HARNESS
∙Fit the shoulder starp to the swivel hook, and adjust the length of starp and or the locaion clamps to maintain the cutter head parallel to the ground.
OPERATION
Oil | 1 |
Gasoline50
OIL : ECHO brand premium
Mix oil and gasoline /gasohol according to insturctions on the oil container label.
MIXING : Follow directions on the oil container.
R+M ) gasoline or 2
gasohol known to be good quality.Gasohol may contain maximum 10% ethyl (grain) alcohol or 15% MTBE (methyl
- 6 -