Echo TC-210 specifications Starting Warm Engine, Operation

OPERATION TC-210

6.Recoil Starter

Pull recoil starter handle/rope (D) until engine fires.

Note: If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 - 5.

7.Throttle Trigger

After engine warm-up, gradually depress throttle trigger to increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke.

1.Stop Switch

Move stop switch button (A) forward away from the STOP position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible in the “Clear” fuel return line. Pump bulb an additional 4 or 5 times.

3.Recoil Starter

Pull recoil starter handle/rope (D) until engine fires (or maximum five [5] pulls).

Note: If engine does not start after 5 pulls, use Cold Start Procedure.

D

A

C

B

D

18 X7504083607

© 9/2014 ECHO Inc.