Echo TC-2100 Type 1, TC-2100 Type 1E NOTE, 3.CHOKE - OPEN, 5.OPENCHOKE-RUN, STOPPING ENGINE, 4.START-PULLROPE, PRIMER - PUMP BULB, STARTING WARM ENGINE, 2.STOP SWITCH - STOP

TILLER/CULTIVATOR 15 OPERATOR'S MANUAL

4.START-PULLROPE.

Pull recoil starter rope until engine fires.

5.OPENCHOKE-RUN.

Move choke (B) to RUN (open) position.

6.RESTARTENGINE-PULLROPE. Pull recoil starter rope until engine fires.

WARNING DANGER

When engine starts, the tines may move even with the throttle trigger in idle (released) position.

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close the choke (B).

NOTE

If engine does not start after 5 pulls, use Cold Start Procedure.

1.STOP SWITCH - START.

Place Stop Switch (A) in START position.

2.PRIMER - PUMP BULB Pump primer bulb (C) until fuel is visible in the "Clear" fuel return line.

3.CHOKE - OPEN.

Be certain choke (B) is open.

4.START-PULLROPE. Pull recoil starter rope.5.STARTENGINE. Start engine at idle.STOPPING ENGINE1.RELEASETHROTTLETRIGGER.

Release throttle trigger and allow engine to idle for a minute.

2.STOP SWITCH - STOP.

Move stop switch to STOP position (A).

WARNING DANGER

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using tiller/ cultivator again.

C

B