Echo TC-2100 Type 1, TC-2100 Type 1E Spark Arrestor Screen, EXHAUST SYSTEM

TILLER/CULTIVATOR 19

OPERATOR'S MANUAL

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder fins.

3.Use the wooden stick or brush to remove dirt from the cylinder fins.

4.Remove grass and leaves from the grid between the recoil starter and fuel tank.

5.When installing the cover, be certain the tab of the metal deflector shield is in the slot of the cover.

EXHAUST SYSTEM

Spark Arrestor Screen

Level3.

Tools Required: Cross Head Screwdriver. 3mm Hex wrench. Soft metal brush. Wooden carbon scraper.

Parts Required: P/N13001642031SparkArrestorScreen

P/N14586642031ScreenHolder

1.Remove screen cover (A), screen holder (B), and gasket (C) from muffler body.

2.Clean carbon deposits from screen (D) and muffler components.

3.Replace screen if it is cracked, plugged or has holes burned through.

4.Install with new gaskets.