Echo X750020201 instruction manual Packing List, EPA 2010 and Later and/or C.A.R.B. Tier

Emission Data

Emission Control (exhaust & evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions for California models may only be applicable to fuel tanks.

An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emis- sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

PACKING LIST

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packag- ing restrictions, guide bar and saw chain installation and other assembly may be necessary.

ECHO chain saw

Instruction manual		Safety manual
	Chain Saw
	Instruction Manual
	MODELS : CS-352

WARNING DANGER

This chain saw is intended for professional or experienced chain saw operators. Read and understand the instructions contained in this manual and the Safety Manual and follow the rules for safe operation. Failure to do so could result in serious injury.

After opening the carton, check for damage. Immediately notify your retailer or ECHO dealer of damaged or miss- ing parts. Use the packing list to check for missing parts.

Assembly Tool (s)

ECHO Power Blend X™ 2-stroke oil sample

Guide bar

Kick Guard®

Saw chain

X7503270900	X750015400
	08/11

Warranty registration card

7 CS-352