Eclipse - Fujitsu Ten CD1000 Track File Up / Down, Direct Track Selection, Fast Forward / Rewind

Operation

TRACK (FILE) UP / DOWN
	Press the [	] or [	] button	Advances to the next track (file).
				Returns to the beginning of the track (file) being
	briefly.
				played. Repeat turning for previous tracks (files).
				Selects the 10th track, the 20th one, the 30th
				one, … and then the last one as follows:
CD				When you are listening to the 26th track
	1 Press the [FUNC] button.			for example, each press of the button will
(MP3/WMA)				advance to the 30th track, the 40th one, … and
				then the last one.
	Press the [ +10] or [ -10]			Selects the first track, the 10th one, the 20th one,
	2 button while [FUNC] is
				the 30th one, … as follows:
	blinking on the display.
				When you are listening to the 26th track
				for example, each press of the button will return
				to the 20th track, the 10th one and then the first
				one.
Direct Track Selection
	Press a button from [1] to [6]
CD	briefly to select the track number			To select a track number from 7 to 12, press a
	corresponding to the [1] – [6]			button from [1] to [6] for several seconds.
	button.
Fast Forward / Rewind
CD	Press the [	] or [	] button for	Fast - forwards.
(MP3/WMA)	several seconds.			Rewinds.

ATTENTION

•While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sound.

•When a CD is already loaded, press the [SOURCE] button to switch to the CD mode.

•This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

•Use only "finalized" CD-Rs or CD-RWs.

•This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•If no MP3/WMA music files can be found, a message [NO FILES] will appear.

•Playback may be intermittent when there is a scratch on a CD or when the recorded side is dirty.

14