Eclipse - Fujitsu Ten CD1000 If you have a question, Displayed information for troubleshooting

If you have a question:

If you have a question:

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD, Refer to the chart for the appropriate action.

	Symptoms	Causes	Remedies
		The volume level is set to the minimum	Adjust it to listening level.
General	Sound cannot be heard	level.
	from the speakers.	Connections are incorrect.	Check wiring and
			connections.
	This receiver does not	The built-in microcomputer may have	Reset the receiver .
	work at all.	functioned incorrectly due to noise, etc.
FM/AM	ASM automatic presetting	Signals are too weak.	Store stations manually.
	does not work.
	Static noise while listening	The antenna is not connected firmly.	Connect the antenna firmly.
	to the radio.
	Disc is automatically	Disc is inserted upside down.	Insert the disc correctly.
	ejected.
	·CD-R/CD-RW cannot be		·Insert a finalized CD-R/
			CD-RW.
	played back.	CD-R/CD-RW is not finalized.
			·Finalize the CD-R/CD-RW
	·Tracks on the D-R/CD-
			with the component which
	RW cannot be skipped.
playback			you need for recording.
	back nor ejected.	The CD player may have functioned	Eject the disc forcibly (see
		Disc is locked.	Unlock the disc (see page
	Disc can be neither played		16).
Disc		incorrectly.	page 16).
		You are driving on rough roads.	Stop playback while driving
			on rough roads.
	Disc sound is sometimes
		Disc is scratched.	Change the disc.
	interrupted.
		Connections are incorrect.	Check wiring and
			connections.
	"NO DISC"appears on the	Disc is inserted incorrectly.	Insert the disc correctly.
	display.

IX

X

25