Basic operation

■Listening to the tuner1.Press the [SOURCE] button repeatedly to switch to the tuner mode.

This will turn the tuner on.

To turn the tuner off, press the [SOURCE] button either shorter to select another mode or longer to turn the power off.

2.Tap the [ BND ] button to switch to the desired FM or AM bands.

[ ] button: Switch the FM band.

Pressing the button repeatedly switches the FM band in the order of FM1→FM2→FM3.

[ ] button: Switch to the AM band.

3.Press the [ TU ] button to tune to a station.

A tap on either the [ ] or [ ] button for less than one

[ TU ] second will enable manual station tuning. Hold one button down for more than two seconds to start the automatic station search.

[

] button: Starts searching toward higher frequencies.

[

] button: Starts searching toward lower frequencies.

•If stations have been stored in memory, pressing a button from [1] to [6] will directly select a station. (Refer to the section “Manually setting stations into memory” on page 36.)

23