How to operate the receiver with an optional DSP/EQ unit connected

[FUNC] button

[AUDIO CONTROL] button Buttons [1] to[6]

▼Fine-tuning EQ functions

1.Press the [FUNC] button for more than one second.

2.Hold button [2] down for more than one second. The EQ adjustment mode starts.

3.Tap button [2] until the desired equalizer mode is displayed.

4.Tap the [AUDIO CONTROL] button to switch frequencies.

The frequencies will switch in the following sequence:

63Hz 125Hz250Hz500Hz 1kHz4kHz 12kHz

5. Turn the [AUDIO CONTROL] button to adjust the level.

Right

:Increases the value.

Left

:Decreases the value.

6.Hold down a button, [1] to [6], for more than two seconds to preset a value.

The preset value is overwritten by the value set using the above steps.

7.Push the [FUNC] button.

This cancels the adjustment mode. The selected value will now take effect.

64