How to operate the receiver with an optional DSP/EQ unit connected

[AUDIO CONTROL] button Buttons [1] to[6]

3.Tap button [AUDIO CONTROL] to select the desired mode of adjustment.

The mode sequence on the button is as follows:

Level• Duration value

LR○○○S (Reverberation duration)*

LR○○○dB (Reverberation level)*

ER○○○mS (Initial echo delay)

ER○○○dB (Initial echo level)

*The level and duration adjustments are available in CONCERT and CATHEDRAL modes only.

4.Turn the [AUDIO CONTROL] button.

This button adjusts the reverberation level and duration. Right: Increases the value.

Left: Decreases the value.

5.Hold down a button, [1] to [6], for more than two seconds to preset a value.

The preset value is overwritten by the value set using the above steps.

Direct (original sound)

Reverberation duration

High

Initial echo]

Level

Time

Long

Initial echo delay

Reverberation

61