Basic operation

3.Press the [SOURCE] button to switch to the [CLOCK ON] display.

4.Press the [FUNC] button again.

Refer to the section on“setting the clock” to set the time display.

■Others▼Disabling the guide tone feature (for button operation)

The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure:

1 . Press the [FUNC] button for more than one second.

2.Press the [ BND ] button repeatedly until [BEEP ON] display appears on the screen.

3.Press the [SOURCE] button to switch to the [BEEP OFF] display.

4.Press the [FUNC] button again.

▼Contrast adjustment

Adjust the display contrast to the best level in accordance with the angle of viewing.

1 . Press the [FUNC] button for more than one second.

2.Press the [ BND ] button repeatedly until [CONT] display appears on the screen.

3.Press the [SOURCE] button to change contrast.

4.Press the [FUNC] button again.

25