Eclipse - Fujitsu Ten CD4000 Installing the main unit, Español Français, Installation angle

Installing the main unit

- Installation angle -

Tip Front

To maintain proper function, the main unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, CD skipping and improper CD and Memory Stick ejection may occur.

30˚ or less

Level (reference)

- Mounting the main unit (If installing the main unit using the mounting sleeve) -

English

Tip

•Carefully bind any excess length of wire that is connected to the main unit and secure it to an area of empty space in the vehicle so that it does not dislodge or interfere with the main unit or vehicle-side equipment. If the wires are not handled correctly, operating problems or short-circuits may occur, and this may result in the danger of fire or other accidents.

•Connect all wires before installing the main unit.

1Insert the mounting sleeve into the opening in the vehicle dashboard or console box.

2Use a screwdriver or a similar tool to bend the tabs in the mounting sleeve to secure the mounting sleeve.

Dashboard or	Bend the mounting
console box	tabs.

3 Mounting sleeve

Español Français

3Attach the side brackets to the main unit using the supplied flathead screws.

Tip

Be sure to use the supplied accessory mounting screws (Red:M5 x 8) as the mounting screws. If any other screws are used, they may damage the inside of the main unit.

1 Main unit

7Flat head screws (Red:M5 x 8)

x2

Italiano Nederlands

4Side brackets

Svenska

- 11 -