English
English Español
System connection example
•Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result.
•The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result.
•If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire insulating method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.
Tip
•Install and connect all of the peripheral equipment before connecting them to the main unit.
•Do not remove any of the protective caps (RCA, etc.) unless in use.
•Be sure to wrap the connection wires with tape (PVC tape) to insulate them.
•Adjust the external amplifier’s input level.
Français
■System for the CD5000
1) CD5000 Main unit, used alone
NO CONNECTION (Do not remove cap) 
NO CONNECTION
NO CONNECTION
NO CONNECTION (Do not remove cap)
NO CONNECTION (Do not remove cap) NO CONNECTION (Do not remove cap)
1MAIN UNIT
ANTENNA PLUG
16P
TO ACC (Power Supply)
Red
White
Italiano Nederlands Svenska
Yellow
TO BATTERY+12V (Permanent Supply)
Blue
TO POWER ANTENNA RELAY (Supply) 
Orange/White
TO HEAD LIGHT SWITCH (Illumination (+) )
Blue/White
TO
Black
TO GROUND
2INTERCONNECTING WIRES (Power and speaker connector)
White/Black
Gray | FRONT | |
SPEAKERS | ||
| ||
Gray/Black |
| |
Green |
| |
Green/Black |
| |
Purple | REAR | |
| ||
| SPEAKERS | |
Purple/Black |
| |
Brown |
| |
Brown/Black | TO STEERING REMOTE CONTROL |
- 8 -
