Eclipse - Fujitsu Ten D2140 Using external audio connections, Internal ports and connectors

Internal ports and connectors

Using external audio connections

1

2 3

1

2 3

1

2 3

Analogue 2-channel audio output

With the 2-channel configuration the functions Line-Out, Line-In and MIC are available.

1 = Line-In (blue)

2 = Line-Out (front channels, green)

3 = MIC (red)

Analogue 4-channel audio output

Line-In is converted into the Rear-Out function with the 4-channel configuration.

1 = Line-In (rear channels, blue)

2 = Line-Out (front channels, green)

3 = MIC (red)

Analogue 6-channel audio output

Line-In and MIC are converted into the function Line-Out with the 6-channel configuration.

1 = Line-In (rear channels, blue)

2 = Line-Out (front channels, green)

3 = MIC (centre and subwoofer channel, red)

Depending on driver version and operating system the functions may differ from this

i presentation. If necessary, further information is provided in the respective help system of drivers and software.

Selecting settings for 2, 4 or 6-channel audio mode

Depending on the driver for the audio mode and from the operating system used, you can configure the audio properties, e.g. with Windows 2000 under Start - Settings - Control Panel - Sounds and Multimedia.

10 - English A26361-D2140-Z120-1-7419, edition 1