Eclipse - Fujitsu Ten D2140 technical manual Bios Recovery Recovering System Bios

BIOS Recovery - Recovering System BIOS

BIOS Recovery - Recovering System BIOS

i All BIOS settings are reset to the default values.

►Open the casing as described in the operating manual.

►Set the switch for "Restore system BIOS" to ON.

►Close the casing as described in the operating manual.

►Insert a BIOS update floppy disk and start the PC.

►Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes.

►Open the casing as described in the operating manual.

►Set the switch for "Restore system BIOS" to OFF.

►Close the casing as described in the operating manual.

►Remove the floppy disk from the drive.

►Start the PC and invoke BIOS Setup.

►Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.

►Save the change and terminate BIOS Setup.

The BIOS recovery has now been completed. The system restarts.

i	Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
	("Drivers & Utilities" CD).

24 - English A26361-D2140-Z120-1-7419, edition 1