EdgeStar AP10000HW owner manual Safety Instructions, Electrical Safety, General Safety

Models: AP10000HW

1 21
Download 21 pages 19.01 Kb
Page 2
Image 2
Safety Instructions

Safety Instructions

Improper handling can cause serious damage to the appliance and/or to the user.

This portable air conditioner is not intended for use by children. Children should be supervised to ensure that they do not play with this product.

Electrical Safety

1.This unit is designed for indoor use only.

2.Do not use the unit in extremely humid or wet environments.

3.Do not wet the housing or control panel.

4.Do not pull the unit by the cord.

5.Always turn the unit off and unplug it from the socket when cleaning.

6.Unplug the unit if it is not going to be used for a long period of time.

7.Do not operate the unit with a damaged plug or a loose socket.

8.Use only the correct power supply with appropriate amperage.

9.If the power cord is damaged, it must be replaced by the manufacturer, a service agent, or qualified technician.

10.Do not remove any part of the casing unless instructed by an authorized technician

General Safety

1.This portable air conditioner is not intended to be used by children.

2.Do not allow children to play with the controls or drop any objects into the air outlets or vents.

3.Do not place objects or let any person sit on top of the unit.

4.Only use in the upright position on a flat, level surface and provide at least 20 inches of clearance from any walls or objects.

5.Route the power cord carefully to avoid a tripping hazard.

6.This unit is intended for domestic use only. Do not use the portable air conditioner for industrial or commercial use. Any other use may invalidate the warranty

Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety plug. This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord. Before using your portable air conditioner, follow the instructions below to ensure that the LCDI plug is working properly:

1.Plug the power cord to a grounded outlet.

2.Press the TEST button on the LCDI plug. This should cut the power to the air conditioner.

3.Press the RESET button to start using your air conditioner.

If the indicator light remains lit after pressing the TEST button, please contact EdgeStar support.

DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST FAILS.

Do not use the TEST and RESET buttons as an ON/OFF switch.

2

Page 2
Image 2
EdgeStar AP10000HW owner manual Safety Instructions, Electrical Safety, General Safety