EdgeStar AP10000HW Operation - Using the Remote Control, Operation - Adjusting the Louvers

Operation – Using the Remote Control

1

2

3

4

5

6

7

Note: The remote uses two AAA batteries.

All the control panel functions can also be set with the remote control.

1.LED Indicator – Lights up when you press any of the buttons.

2.Power Button – Used to power the unit on or off

3.Mode Button – Used to change between auto, cooling, heating, or fan modes.

4.Timer Button – Used to set the timer function.

5.Up Button – Used to increase the temperature.

6.Down Button – Used to decrease the temperature.

7.Fan Speed Button – Used to set the fan speed.

Operation – Adjusting the Louvers

Regulating air flow direction

Move the roller on the air vent to the left or right to control the air flow direction.

FIG.14

NOTICE !

1.To prolong the compressor's life, please wait at least 3 minutes before turning the unit back on after shutting it off.

2.The cooling system will shut off if the ambient temperature is lower than the set one. The fan, however, keeps working on the set level. If the ambient temperature rises above the selected level, the cooling system will return to operation.

3.On the contrary, the heating will swith off if the ambient temperature is higher than the set one(still, the ventilation keeps working on the set level). As the ambient temperature drops below the selected level, the heating will return to work.

4.This machine is equipped with ANTI-FROST function. While using the heating function during low temperature, sometimes the heating will stop for a while in order to melt the frost. As this occurs, just wait for the heating returns to work.

12