Operation – Using the Control Panel
Control Panel Parts
17 16 15 14 13
1
2
3
POWER |
|
|
| |
| TIMER |
| SPEED | |
| UP |
| DOWN | |
|
|
| ||
4 |
| A/C | Water | |
5 | 6 | 7 | ||
|
12
MODE | AUTO | 11 |
|
|
10 8 9
FIG.12
1. | Power button | 9. | High fan speed indicator |
2. | Timer button | 10. | Heat mode indicator |
3. | Timer operation indicator | 11. | Fan mode indicator |
4. | Temperature up button | 12. | Cooling mode indicator |
5. | Compressor indicator | 13. | Automatic mode indicator |
6. | Water Full indicator | 14. | Mode (function) option button |
7. | Temperature down button | 15. | Fan speed button |
8. | Low fan speed indicator | 16. | Display window |
|
| 17. | Receiver for remote control |
Turning the Unit On or Off
Press the Power button and the unit will start in auto mode. If the ambient temperature is:
-Higher than 74o F, the unit will operate in cooling mode.
-Higher than 68o F but below or equal to 74o F, the unit will operate in fan mode.
-Below 68o F, the unit will operate in heating mode.
An indicator light will display next to the corresponding mode.
*NOTE: The display window shows the ambient room temperature from 32o F to 122o F
To turn the unit off, press the Power button again.
Selecting Between Automatic, Cooling, Heating, or Fan Mode
Press the MODE button to select the desired mode: automatic, cooling, heating or fan. The indicator of your selected mode comes on.
10