EdgeStar AP12000S-1 Operating the Control Panel, Power, Cooling Mode, Dehumidifying Mode

		Operating the Control Panel
Power		Use the Power button to turn the portable air conditioner on and off.
		By default when you first use the power button, the unit will begin to
		operate in cooling mode. The unit will remember the last used
		mode/settings if you shut down and restart.
		Auto-Restart:If power to the unit is interrupted, the air conditioner
		will restart itself in its last used mode/settings once power is
		restored. The compressor will restart after 3 minutes.
Cooling Mode		Cooling mode cools and dehumidifies the air. If the ambient
		temperature drops below the temperature you selected, the
		compressor turns off and the unit functions with the fan only. When
		the temperature rises above the temperature you selected, the
		compressor turns on again.
		Whether your desired temperature can actually be reached
		depends on the ambient conditions. The room temperature
		remaining above the set temperature is normal.
		To operate the unit in cooling mode:
		1) Make sure the power cord is plugged into a power outlet.
		2) Press the Power button.
	NOTE: The exhaust hose	3) Press the Mode button until the LED indicator next to “Cooling”
		lights up.
	must be used in Cooling
		4) Select the fan speed by using the Speed button.
	mode in order to cool a
		5) Set the thermostat by using the Up and Down buttons. The
	room.
		thermostat is adjustable between 61°F - 89°F in one degree
		increments in cooling mode.
Dehumidifying Mode		During the Dehumidifying mode, the unit will condense water out of
		the air and exhaust it through the exhaust hose. The ambient
		temperature in the room will probably drop by a few degrees while
		using the Dehumidifying mode.

To operate the unit in dehumidifying mode:

1)Make sure the power cord is plugged into a power outlet.

2)Press the Power button.

3)Press the Mode button until the LED indicator next to “Dehumidify” lights up.

NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose. You will be not be able to change the thermostat temperature while in Dehumidifying Mode.

11