Maintenance – Cleaning the Unit
Always unplug the air conditioner from the power outlet before cleaning. Clean the air conditioner regularly to maximize performance and efficiency.
Cleaning the unit
Use a soft damp cloth to wipe the body clean.
Use a soft bristle brush to clean between the control panel’s buttons.
Never use abrasive chemicals, gasoline, detergents, chemically treated cloths, or other cleaning solvents that may damage the cabinet exterior.
Cleaning the pre-filters
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt, then rinse thoroughly under warm running water that is no hotter than 104o F. Dry thoroughly before replacing.
Note: The activated carbon filter is not washable- replace it as needed. Contact EdgeStar at
Warning: Never operate the unit without the filters.
Preparation for Storage
Follow the instructions below to prepare your product for storage.
1.Drain all the water from the unit before storing. Operate the unit in fan mode for a few hours to thoroughly dry the inside.
2.Clean or change the filter.
3.Unplug and store the power cord as shown.
4.Replace the unit in the original carton, or cover it before storing away.
Power cord compartment
FIG.16
14
