Operation – Using the Control Panel
Control Panel Parts
|
|
| FIG.10 |
1. | Fan speed button | 11. | Temperature down button |
2. | Timer button | 12. | Power indicator |
3. | Display window | 13. | Water full indicator |
4. | Senor for remote control | 14. | Power button |
5. | Heat mode indicator | 15. | Sleep mode button |
6. | Mode (function) button | 16. | Compressor indicator |
7. | Automatic mode indicator | 17. | Sleep mode indicator |
8. | Cooling mode indicator | 18. | Timer indicator |
9. | Fan mode indicator | 19. | Low fan speed indicator |
10. | Temperature up button | 20. | High fan speed indicator |
Turning the Unit On or Off
Press the ‘POWER’ button and the unit will start in auto mode. If the ambient temperature is:
-Higher than 73o F, the unit will operate in cool mode.
-Higher than 68o F but below or equal to 73o F, the unit will operate in fan mode.
-Below 68o F, the unit will operate in heating mode.
An indicator will display next to the corresponding mode.
*NOTE: The display window shows the ambient room temperature from 32o F to 122o F To turn the unit off, press the Power button again.
Selecting Between Automatic, Cooling, Heating, or Fan Modes
Press the MODE button to select the desired mode: automatic, cool, heat or fan. The indicator of your selected mode comes on.
9
