EdgeStar AP420HS Installation - Activated Carbon Filter, Pleated panel Pre-filterframe

Installation – Activated Carbon Filter

Instructions to install the carbon filter

1.Remove the pre-filter frame from the unit.

2.Separate the pleated panel from the pre-filter frame.

3.Remove the activated carbon filter from its plastic bag.

4.Place the activated carbon filter into the pre-filter frame.

5.Secure the filter by reassembling the pleated panel to the pre-filter frame.

6.Install the pre-filter frame to the unit.

Note: Replace the activated carbon filter every 2-3 months or as needed.

Pleated panel

Pre-filter frame

6