- 43 -
4. Push the ‘WPS’ button on your wireless access point (the button used to activate WPS standby mode may
have another name), or use other way to start WPS standby mode as the instruction given by your wireless
access point’s user manual.
4. Before you start to establish the wireless connection by using WPS, you can click ‘Rescan’ button to
search for WPS-enabled access points near you, to make sure the WPS function of your access point is
activated.
All access points found will be displayed. Please make sure the access point you wish to connect is displayed. If
not, please click ‘Rescan’ few more times. You can also click ‘Information’ button to see the detailed information
about selected access point.
5. Click ‘PBC’ button now to start to establish wireless connection by WPS, and please be patient (This may
require several seconds to one minute to complete). When you see ‘WPS status is connected successfully’